REMS POLSKA Sp. z o.o.

REMS ESPAÑA, S.A.

REMS S.r.l.

REMS Česká republika s.r.o.

REMS SARL

REMS (UK) Ltd.

REMS Scandinavia A/S

REMS POLSKA Sp. z o.o.

REMS ESPAÑA, S.A.

REMS S.r.l.

REMS SARL

REMS (UK) Ltd.

REMS Scandinavia A/S

News

June 03, 2020

REMS Picus DP

REMS Picus DP– Core drilling without water with micro-impact technology. Easy, fast, quick, e.g.  200 mm in steel-reinforced concrete Ø 62 mm in only 5 min.
 

Compact, handy electric tool for core drilling without water in concrete, steel-reinforced concrete, all kinds of masonry, natural stone, asphalt, all kinds of screed. Particularly for dry drilling, hand held or with drill stand. For trade and industry.

Steel-reinforced concrete up to Ø 162 (202) mm
Masonry and others up to Ø 202 mm
REMS diamond core drilling crowns for dry drilling, also for suitable drive machines of other makes


 
June 03, 2020

REMS Diamond core drilling crowns LS for dry drilling

REMS diamond core drilling crowns LS for dry drilling – laser welded, high temperature-resistant. Particularly for dry drilling with core drilling machines with micro-impact technology. Versatile for many types of materials. Ideal for plumbers.

 

High quality diamond core drilling crowns for dry drilling. Laser welded. Especially applicable for dry drilling with micro-impact technology, e.g. REMS Picus DP, hand held or with drill stand. Ideal for universal use in concrete, steel-reinforced concrete, masonry and other materials.
Concrete, steel-reinforced concrete, all kinds of masonry, natural stone, asphalt, all kinds of screed and others Ø 32-202 mm




 
June 02, 2020

REMS Multi-Push S

REMS Multi-Push S Flushing with water or a water/air mixture. Simple shifting of air supply while desilting. Permanent process monitoring. Logging. USB interface.

 

Powerful, compact, electronic flushing unit with oil-free compressor. For flushing with water or a water/air mixture, disinfection, cleaning, preservation of pipe systems, operation of pneumatic tools.
Flushing and desilting
Water pressure pipe network p ≤ 1 MPa/10 bar/145 psi
Pipe diameter installation ≤ DN 50, 2"
Disinfection of drinking water installations
Cleaning and preservation of radiator and panel heating systems
Water temperature 5 – 35°C
Water flow ≤ 5 m3/h
Operation of pneumatic tools
Operating pressure p ≤ 0,8 MPa/8 bar/116 psi
Suction pressure ≤ 230 N/min

June 01, 2020

REMS Akku-Collum RG 22 V

REMS Akku-Collum RG cordless roll grooving up to 12". Fast and economical feed of the pressure roller with oil-hydraulic pressure cylinder. Li-Ion battery 21.6 V, 9.0 Ah, for approx. 23 grooves DN 100/4" with one battery charge.
 

Powerful cordless roll grooving machine for fast, economical grooving of pipes for pipe coupling systems. For installation, sprinkler lines, commercial heating, industry and mining. For job site and workshop.

Steel pipes DN 25 – 300, 1 – 12", s ≤ 7 mm
Stainless steel pipes, copper, aluminium, PVC pipes

January 01, 2020

REMS Akku-Press XL 45 kN 22 V ACC

REMS Akku-Press XL 45 kN 22 V ACC – the powerful one.
Pressing up to Ø 108 mm in a single action. Anti-vibration system. Super fast, e.g. Geberit Mapress STAINLESS STEEL Ø 108 mm in just 15 s. With automatic circuit control. Secure seating of adapter tongs by automatic locking. Battery Li-Ion 21.6 V, 5.0 Ah, for approx. 120 pressings Geberit Mapress STAINLESS STEEL Ø 76.1 mm with one battery charge.
 

Universal, powerful electric tool with automatic circuit control for producing XL pipe pressing joints for all common pressfitting systems. Li-Ion 22 V technology. For battery and corded operation.
Pipe pressing joints XL Ø 64 – 108 mm, Ø 2½ – 4".
Complete range of REMS pressing rings XL (PR-3S) for all common pressfitting systems.
March 11, 2019

REMS Akku-Amigo 22 V

REMS Akku-Amigo 22 V – handy and light.
Battery Li-Ion 21.6 V with 9.0 Ah capacity for 52 threads ¾" per battery charge

Powerful, easy-to-operate cordless tool for threading with unique support bracket.
Ready for use any-where, without vice. Ideal for repair, renovation, job site.
Li-Ion 22 V technology. For battery and mains operation.
Pipe threads ⅛ – 1", 16 – 32 mm
Bolt threads 6 – 30 mm, ¼ – 1"
March 11, 2019

REMS Akku-Tiger 22 V VE

REMS Akku-Tiger 22 V VE – the saw for the pipe fitter.
Saws effortless, fast, right angle. Robust and handy.
Battery Li-Ion 21.6 V, 9.0 Ah, for 100 cuts 1" with guide support per battery charge.

Powerful, robust, handy cordless tool with force-transmitting guide holder for effortless, fast, right-angled sawing everywhere on site, without a vice. Also for universal free-hand sawing. Only 3.4 kg. Ideal assembly, dismantling, repair. Li-Ion 22V technology. Ideal for steel pipes and many other materials, e.g. wood, wood with nails, pallets, metal, even stainless steel, cast iron, breeze blocks, plaster boards, pumice stone, brick.
March 11, 2019

REMS Akku-Press 22 V ACC

REMS Akku-Press 22 V ACC – universal up to Ø 110 mm.
With automatic circuit control and pressure monitoring. Anti-vibration system. Ultra-fast, safe press jointing. Automatic locking of the pressing tongs. Li-Ion 22 V technology for 50 % more pressing cycles as with battery Li-Ion 14.4 V.

Universal, handy cordless tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. Li-Ion 22 V technology.
For battery and mains operation. Pressing joints Ø 10 – 108 (110) mm, Ø ⅜ – 4"
Complete range of REMS pressing tongs / pressing rings for all common pressfitting systems.


 
January 01, 2019

REMS Akku-Cento 22 V

REMS Akku-Cento 22 V – Mobile cutting and deburring up to Ø 115 mm. Super fast. Right angled. Chip-free. No outer burr. Dry cutting. Li-Ion Technology. Universal for many pipe types.

Light, portable compact machine. Universal for cutting and deburring pipes and tubes. For trade and industry. For the building site and the workshop. Li-Ion Technology. For battery and corded operation.
Stainless steel pipes of pressfitting systems, carbon steel, copper Ø 8–108 mm,
Steel pipes DIN EN 10255 (DIN 2440) DN 10-100, Ø 1/4-4'', Ø 14-115mm,
Cast iron pipes (SML) EN 877 (DIN 19522) DN 50-100,
Plastic pipes SDR 11 Ø 10-110mm, wall thickness s ≤ 10mm,
Multilayer composite pipe Ø 10-110mm.
 

January 01, 2019

REMS ROS P 26/SW 35

REMS ROS P 26/SW 35 – Fast cutting in one go up to 26 mm. With integrated pipe cutter for protective plastic corrugated tubes up to Ø 35mm.


 

Robust quality tool for clean, fast cutting of pipes. With integrated pipe cutter for protective corrugated tubes. Stable magnesium version. For one-hand operation.
P plastic tubes, composite tubes ≤ Ø 26 mm, ≤ Ø 1”
SW protective corrugated plastic tubesf Ø 18-35 mm, Ø 3/4-1 3/8”
 
January 01, 2019

REMS Frigo 2 F-Zero

REMS Frigo 2 F-Zero electrically freezing instead of draining.
Super fast up to 2". High cooling capacity, e.g. 3/4" steel pipe in only 9 min*. Very small, patented deep-freezer heads, quickly assembled. Temperature display with LCD digital thermometer.

*ambient/water temperature 20°C.


 

Easy, fast freezing of pipes which are not drained. Closed refrigerant circuit. Environmentally safe. For repair and extension of piping systems.
Steel, copper, plastic, composite pipes Ø 1/8–2" Ø 10–60 mm.
Internal refrigerant: R-290.
 
January 01, 2019

REMS Akku-Curvo 22 V


REMS Akku-Curvo 22V – wrinkle-free bending of pipes.
Universal for many pipes and tubes. Ready to use immediately without setting. Fast and creep speed operation with immediate stop for precise bending. Quick change of bending and back formers. Li-Ion 21.6V, 5.0 Ah battery for 50% more bends compared with Li-Ion 18V, 3.0 Ah battery.
 

Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Can be used anywhere, without vice. For trade and industry. For the building site and the workshop. Li-Ion Technology. For battery and corded operation.
Hard, half-hard, soft copper tubes, also thin-wall Ø 10–28 mm, Ø 3/8–11/8"
Coated soft copper tubes, also thin-wall Ø 10–18 mm
Thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø 3/8–11/8"
Pipes of press fitting systems made of stainless steel, carbon steel, also coated Ø 12–28 mm
Soft precision steel tubes Ø 10–28 mm
Steel pipes EN 10255 Ø 1/4–3/4"
Electric conduit DIN EN 50086 Ø 16–25 mm
Multi-layer composite tubes Ø 14–40 mm
 

January 01, 2019

REMS Akku-Cat 22 V ANC VE



REMS Akku-Cat 22V ANC VE – saws anything, anywhere.
Extremely versatile and powerful. Li-Ion 21.6V, 5.0 Ah battery for 50% more cuts compared with 18V, 3.0 Ah.




 

Powerful, robust, handy electric tool for universal free-hand sawing. No cable. Only 3.1 kg. Ideal for assembly, dismantling, repair. Li-Ion 22V Technology. For battery or mains operation.
Many materials, e.g. wood, wood with nails, pallets, metal, even stainless steel, cast iron, breeze blocks, plaster boards, pumice stone, brick. Especially also for steel pipes.

 
January 01, 2019

REMS Herkules XL 12"

REMS Herkules XL 12" extra stable for pipes up to 12".  


 

Height adjustable material support with ball guide for rotating and standing tubular and solid material. For trade and industry. For the building site and the workshop.
Pipes, solid material Ø (1/8) 1 1/4–12", Ø (6) 42 –324 mm
Load capacity ≤ 450 kg


 
August 01, 2018

REMS Secco 50

REMS Secco 50 - for drying and dehumidifying

Powerful, highly efficient air dehumidifier/building drier for drying rooms, e.g. after mains water damage, flooding, dehumidification of damp cellar rooms etc. and for fast drying of concrete, masonry, plaster and screed for example.
Dehumidification rate ≤ 50 l/24 h, air volume ≤ 265 m³/h


 
May 16, 2018

THE SELECTION OF WINNERS

For purchases between May 14 until July 15 of one or more products from our 'THE SELECTION OF WINNERS' promotion you will receive attractive give-aways. Find all information and conditions regarding give-aways under: https://promotion.rems.de
 

March 15, 2018

REMS Calc-Push

 

REMS Calc-Push – effective electric decalcifying. High displacement. 3-way lever for reversal of flow direction, with zero setting.

 

 

Powerful, electric decalcifying pump for effective decalcifying of pipes and containers, e.g. flow heaters, boilers, hot water tanks, cold water tanks, heat exchangers, heating and cooling systems.
 
Useful container volume                                21 l
Displacement                                               ≤ 30 l/min
Displacement pressure                                  ≤ 0.1 MPa/1.0 bar/15 psi
Transport height                                            ≤ 10 m
Temperature of decalcifying solution               ≤ 50°C


 
August 01, 2017

REMS CamSys 2

REMS CamSys 2 – Brillant pictures and videos of pipes and drains.
Voice recording. Self-levelling camera. SD card slot. Electronic metering. For battery and mains operation.


REMS CamSys 2 – Brillant pictures and videos of pipes and drains. Voice recording. Self-levelling camera. Transmitter for localising the camera. SD card slot. Electronic metering. For battery and mains operation.

Ultra light, handy camera inspection system for inexpensive inspection and damage analysis of pipes, drains, chimneys and other hollow cavities. Self-levelling camera. Transmitter for localising the camera. Electronic metering. Also for inspection after pipe cleaning work and for acceptance of new installations or repairs. Documentation of pictures and videos on SD card. For battery and mains operation.

Camera head S-Color/S-Color S     Ø 25 mm
Camera head S-Color S-N             Ø 33 mm
Pipes                                          Ø (40) 50 – 150 mm
Drains, chimneys other cavities
March 14, 2017

REMS Mini-Press S 22 V ACC

REMS Mini-Press S 22 V ACC – universal up to Ø 40 mm, 1 1/4".
Super light, super small, super handy, ultra fast.
REMS Li-Ion 22 V Technology.

Universal, ultra handy cordless radial press with forced return for making press joints Ø 10 – 40 mm, Ø ⅜ – 1 ¼". The new REMS Li-Ion 22 V Technology sets standards in terms of economy and user friendliness and enables the user to make ultra fast pressings in less than 4 s for 50 % more pressings1). The automatic locking of the pressing tongs and the automatic retraction after completion of the pressing operation (automatic circuit control) give the user additional safety. With a weight of 2.6 kg this cordless radial press enters a new dimension. It can be used everywhere, free hand, over head, also in very confined spaces.

1) Battery Li-Ion 21.6 V in comparison to Battery Li-Ion 14.4 V
January 01, 2017

REMS Hydro-Swing

REMS Hydro-Swing – Effortless working due to oil-hydraulic force transmission.
Ideal for multi-layer composite tubes up to Ø 32 mm. Also for stainless steel tubes up to Ø 22 mm.

Oil-hydraulic hand pipe bender Ø 10 – 32 mm, Ø ⅜ – ⅞", up to 90°.
Soft copper tubes Ø 10 – 22 mm, Ø ⅜ – ⅞", s ≤ 1mm,
Coated soft copper tubes Ø 10 – 18 mm, Ø ⅜ – ⅝", s ≤ 1mm,
Tubes of pressfitting systems in stainless steel Ø 12 – 22 mm, s ≤ 1.2 mm,
Coated soft carbon steel tubes Ø 12 – 22 mm, s ≤ 1.5 mm, soft precision steel tubes Ø 10 – 22 mm, s ≤ 1.5 mm,
Multi-layer composite tubes Ø 14 – 32 mm.
January 21, 2015

REMS Mini-Press 22 V ACC

REMS Mini-Press 22 V ACC – universal up to Ø 40 mm, 1 1/4".
Super light, super small, super handy, ultra fast.
REMS Li-Ion 22 V Technology.

Universal, ultra handy cordless radial press with forced return for making press joints Ø 10 – 40 mm, Ø ⅜ – 1 ¼". The new REMS Li-Ion 22 V Technology sets standards in terms of economy and user friendliness and enables the user to make ultra fast pressings in less than 4 s for 50 % more pressings1). The automatic locking of the pressing tongs and the automatic sequence of the pressing process give the user additional security. With a weight of 2.5 kg and a length including Mini V 15 pressing tongs of only 31 cm this cordless radial press enters a new dimension. It can be used everywhere, free hand, over head, also in very confined spaces.

1) Battery Li-Ion 21.6 V in comparison to Battery Li-Ion 14.4 V